GUARD TOWER- complete- PORTABLE

PRODUCT DESCRIPTION

Click here for 1 page brochure
Click Here for Assembly Instructions in PDF format

The Portable Guard Tower is a complete unit which includes one Guard Tower, one Conex Box, one pallet (75 coils or 3750 ft) of 18" Helix Coil, and a Wire Installation Kit. The Wire Installation Kit includes a Fence Driver, 25 5-foot stakes, and 25 7-foot stakes. Options available: Concertina wire or Hook Barbed Detainer Wire.

The Guard Tower itself is manufactured with four separate wall units that allow for quick and easy assembly on top of the standard Conex Box. Once placed on the Conex Box the Guard Tower will be approximately 12 feet in the air, giving the guards a greater view of the perimeter or area of threat. Once in position, the walls are filled from the top using sand as ballast. The sand filled walls provide the guards inside with 360 degrees of protection from 9mm, 5.56, and 7.62 threats. 12” dumps are provided for easy removal of the ballast allowing the Guard Tower to be repositioned as needed.

The overhead cover is 3/4” plywood on which lights, sensors, and antennae can be installed if desired. Access to the cover can be reached through a hatch type door that is pre-installed for convenience. The CBP Guard Tower eliminates the time and the mess associated with using sandbags. This product is a recoverable asset that can be broken down and deployed inside the Conex Box.

All parts and tools needed for assembly are included in the kit bag. Stakes are also provided for the Concertina Wire installation. The standard colors for the Portable Guard Tower are Olive Drab or Desert Tan; however, all colors are available upon request. There is also an optional cover available in Olive Drab and Desert Tan.