more info |
| Each square foot has an approximate empty weight of 21 lbs. |
| Panel Size |
Part No. |
Sand needed to stop 7.62 |
Sand needed to stop 600lbs ANFO |
| 12 x 12 |
7839-GG |
36 lbs |
46.5 lbs |
<
| 12 x 12 |
7839-TG |
36 lbs |
46.5 lbs |
| 12 x 48 |
7841-GG |
144 lbs |
184 lbs |
| 12 x 48 |
7841-TG |
144 lbs |
184 lbs |
| 24 x 24 |
7840-GG |
72 lbs |
92 lbs |
| 24 x 24 |
7840-TG |
72 lbs |
92 lbs |
| 24 x 48 |
7842-GG |
288 lbs |
368 lbs |
| 24 x 48 |
7842-TG |
288 lbs |
368 lbs |
| 48 x 48 |
7843-GG |
576 lbs |
736 lbs |
| 48 x 48 |
7843-TG |
576 lbs |
736 lbs |
The CBP High Threat, Modular, Blast Wall is manufactured
from polyethylene plastic with three plates of .135” thick,
10 gauge steel installed within. The combination of high-density
plastic and U.S. steel creates a formidable barrier against blast
and ballistic threats. This Blast Wall is manufactured in three
standard sizes: 24"x24", 24”x48”, 48"x48".
However, CBP understands that no threat situation is the same
and can customize the Blast Wall to fit your specific needs.
CBP has conducted blast and ballistic tests against
this product. Depending on how much sand ballast is used, the
Blast Wall will provide protection from 7.62, 5.56, 9mm, and up
to 600lbs of ANFO blast mitigation (or a similar explosive level).
Each square foot weighs approximately 19 lbs empty and approximately
52 lbs when filled with sand.
Quantity discounts available on retail sales only. Will accept government credit cards. Terms 2% 10, Net 30 days standard. *Product Only